Description
–The identifier can directly test 0.25mm bare fiber, 0.9mm pigtail, 2mm or 3mm fiber jumper without frequent replacement of adapters.
–Can identify CW, 270Hz, 1Hz, 2KHz signals.
–The left and right LED indications show the transmission direction of the signal.
–ABS plastic shell, wear-resistant, comfortable to touch.
–Small and light, easy to carry.
Description:
Product Name: Fiber Optic Identifier
Parameters, optical power reading: -40dBm to 10dBm;
Wavelength recognition range: 800~1700nm;
Signal frequency: CW, 270Hz±5%, 1KHz±5% and 2KHz±5% signals;
Wavelength recognition range: 800~1700nm;
Identification signal type: CW, 270Hz±5%, 1KHz±5% and 2KHz±5%;
Detector type: 1mm InGaAs 2 pieces;
Adapter type: suitable for 0.25mm bare fiber, 0.9mm, 2.0, 3.0mm fiber;
Signal direction indication: left and right LED indications;
Optical power reading: -40dBm to 10dBm;
Signal frequency: 270Hz, 1KHz, 2KHz;
Power supply: 2 x AA batteries (not included);
Working temperature: -10°C to 60°C;
Storage temperature: -25°C to 70°C;
How To Use: 1. Add a 1310 or 1550 nm light source (frequency 270, 1k or 2Khz) on the upper end of a large number of optical fibers. 2. Then use the fiber identifier at the other end to test all fibers in turn. If one of the measured power, direction, or frequency indications is found, the fiber is the one to search. The optical fiber identification device can be matched with 3mm or 2mm (fiber jumper), 0.9mm fiber jumper inner cable (tight sheath fiber), 0.25mm bare fiber (removed bare fiber);
Packing list:
1 x fiber optic identifier
1 x manual
1 x storage bag
1 x packing box
Reviews
There are no reviews yet.