Description

–The battery adapter/connector is equipped with fixing screw holes, which is convenient for fixing with screws.
–This is not a charger, it only outputs battery voltage and power directly from the battery.
–Do not short-circuit the battery or continuously consume more than 20 amperes of current.
–Disconnect the battery before the battery reaches 14 volts (extend battery life).
–Do not charge with 100% power for a long time. It is recommended Store battery at 70% power (extend battery life).
Feature:
1. The battery adapter/connector has been tested and can be used compatible for DeWALT 20V /18VDCB series lithium-ion batteries. Including models: DCB184, DCB204 and DCB205, DCB200, DCB203, DCB606, etc. The adapter has been installed with a 150 mm gauge line.
2. There is only 1 battery adapter, no battery.
3. Do not use this adapter to charge the battery.
Description:
Product name: Adapter
Plastic: mold injection ABS+PC material (yellow)
Wire: Teflon 1332 12AWG
Outgoing wire length: 150mm
Packing list:
Adapter x 1
Note:
The color deviation is subject to actual system configuration and 1-3cm slight dimension difference is allowed due to manual measurement. Please refer to the size chart based on your actual figure.